Hi.
I have done the test with the drill on the sensor and the speedo works fine. so it has got to be the transaxle speedo drive.
Regards.

Hi.
Thanks for your interest and replies. All three sensors I have do appear to have the gears intact as when I spin them by hand I can feel the resistance or the gear inside. I think it is time to call in the services of an auto electrician.

Regards
Richard.

Hi
Thanks for your replies.
The speedo drops to zero. The new sensor I got was not a genuine one . I have sourced a used original to try. If that does not work I think it must be a wiring issue.
I will keep plugging away

Regards,
Rchard

Hi, I know there are similar threads. I have been through them all. I have started this as a fresh topic due to the fact the previous threads are getting on a bit and someone else since then may have had the same problem and therefor have fresh information to offer that was not posted on the older t...

Hi, I have posted this here as I was not quite sure where to post it. Some of you may be aware that if you come across a photo on a thread that is blurred with Photo Bucket superimposed on it there is a way to view the photo. Just click on it, it takes you to Photo Bucket and you can view the photo ...

Hi all. As some of you are aware I have started to stockpile spares for my Puma. The other day I managed to pick up a almost mint heated windscreen for £15 I thought that was a bit of a bargain. Does any one have useful tips on how to remove the original bonding sealant from the screen? Regards, Ric...

Hi,
Thanks for that.l did find a good site for Ford part numbers.l have called many dealers as you say obsolete. Time l think to tackle the breakers yards.

Regards Richard

Hi
This is interesting. It answers my last post. The first address is the site

https://ford.7zap.com/en/car/

This next one is a sample page. brilliant

https://ford.7zap.com/en/car/57/no/0/1833/16630/72419/


Regards,
Richard

Hi.
Can anyone tell me the Ford part number for the external drivers door/window seal that runs from under the door mirror to the b post. Has anyone got a vgc one for sale?
Regards
Richard

Hi.
I have restored lights. rub them down with 2000 wet and dry then polish them with compound off ebay, it is called 'Lamp Doctor'

https://www.ebay.co.uk/itm/K2-Pro-LAMP- ... 2793183&ha

Regards,
Richard.

Hi,
Yes, I thought I would donate my spare engine just removed from my Puma, which is still very good to a deserving Puma to get it back on the road.

Regards
Richard.

Hi.
Is there any one out there who has a good road worthy Puma that has died to terminal engine failure and as such might not move again. The reason l ask is l may be able to help you (for free).
Regards
Richard

Hi, I have been very busy flashing the cash. My Puma is coming up to 140k now the engine still pulls well is smooth and quite. Any way I purchase a used engine with 27k on it in June. I had it fitted with as many new bits as possible, clutch, belts, water pump, all new oil seals, injectors, a/c comp...

Hi, I have been very busy flashing the cash. My Puma is coming up to 140k now the engine still pulls well is smooth and quite. Any way I purchase a used engine with 27k on it in June. I had it fitted with as many new bits as possible, clutch, belts, water pump, all new oil seals, injectors, a/c comp...

Hi Tony.
Thanks for that. For som reason l cannot seem to upload pictures at the moment. But l will take your advice and see what l can find. Psrhapse l can find one on a Fiesta.
Regards
Richard.

Hi.
l am in need of a plug with wires attached.
lt is the brown plug with a white and brown wire attached. lt plugs into a metal section of what l think is the power steering hose under the A/C compressor. lf you can help please call me on 07707 561956.
Regards
Richard.

Hi, All. I thought I would post an update. My Puma has now done 137k, so when it comes to MOT time I Start getting a bit jittery. Well it passed this year with a minor fault being a number plate bulb out and some brake advisories which l was aware off I can breath a sigh of relief until next year. S...

Hi.

Thanks for the reply. l just needed some idear for estimating shipping costs.

Regards
Richard.

Hi.
Can anyone tell me the wieght of 1.7 engine when stripped of it ancillaries.
Regards
Richard

Hi Red.
l did attempt to down load the photos using the add files button, they would not download. A message was displayed stating that the photo was to large. lt was infact only 3.7 mb it should have downloaded as the max. size the site would accept is 7mb.
Regards
Richard.

Hi. It has been some time since l did an update. My Puma is once again looking pristine. The second week of November it went into the spray shop and had both sides resprayed, making good the cosmetic damage from the hit and run, stone chips, and supermarket door bashers. Back in the summer l had the...

Hi. I have had my Puma for fourteen years and I will never get rid of it. This year I spent £1360 on MOT which included welding, bespoke cat, handbrake cables, rear brakes and lambda sensor. I have just spent £725 on spray work to restore the body to its former glory. I will be adding a post with mo...

Hi Cherie

Thank you very much.

Regards
Richard

Hi Cherie
Could you please tell me how I would do this, thanks.

Regards,
Richard.

Hi,
Is there any free site that is an alternative to photo bucket that can be used for posting photos on to Project Puma site. I have only ever used photo bucket for this site only, so the number of photos does not warrant a continuous monthly fee.

Regards,
Richard