what ecu to use for turbo puma project ??

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

lidds6841

New member
Joined
Oct 4, 2015
Messages
20
Hi guys,
What ecu set up are people using when turbo converting the 1.7 zetec se. I've collected all my parts and am now part way through putting the engine together so need to start thinking about the best management. Couple of my friends are very happy with the omex 600 ecu and seems to work fine for their projects so was edged towards omex. But what to do with the vct? Do people just do away with it or is there an ecu out there that will control it.? I've seen a few turbo threads so just wondered what was being used and if it got good results.
 
Have people got the vct working on aftermarket ecu's or do they just remove it. ?
 
Emerald k6 can run vct, my advice: choose a ecu that can be programmed near to where you live I.e your local rolling road that specialise in a particular one
 
There are many aftermarket ecu's that will run vct, it will come down to your budget. My advice would be to get the best you can afford and like mentioned before something that can be mapped local to you (unless you're happy travelling).

I use Omex 600 on mine, but mainly because I had it lying around from a previous project. At some point I will move the car onto a life racing ecu as the options available with this management are very comprehensive.
 

Latest posts

Back
Top