Electrical Connector Gaskets/Seals

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Blackdungeon

New member
Joined
Apr 5, 2014
Messages
12
Something that's happened a few times, unplugging a connector then when reconnecting it the bloody red rubber seal splits and gets wedged in.

Not surprising after 20 years, but then where do you get a replacement for these?

Presumably not having one will quickly lead to a short sooner or later....

In the past I'd hunted for spares of these in scrapyards, but these will most likely be just as old and fragile. Is there anywhere to get new connector gaskets?

Cheers
 
Brilliant thanks, that's incredibly useful!

Puma ABS connector looks to be about the same as;
WPT-1359
(Tin greased)
3U2Z-14S411-UDB
...from memory but looking further down there's a few that could be similar.

Guess I'll have to buy and try!

There's so many connectors in there, why didn't they standardise a bit more!!!

Cheers
 
I ended up ordering a DJ7022Q-1.5-11 from AliExpress. (which is just the socket rather than the plug).

It appears to be identical, the seal that came with it looked improbably small but I was able to stretch it over the existing socket centre bit and it looks just like the original seal now so all good I think.

Cheers
 

Latest posts

Back
Top