Search results

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. N

    Puma Body Kit

    if you send me your email or phone number I will get some pictures to you
  2. N

    Puma Body Kit

    Body kit for Ford Puma front spoiler, side skirts, rear bumper valance and rear spoiler all parts fit to existing panels and bumpers. You will need silicone sealer or something similar to bond it and a few self tapping screws. Sides skirts and rear valance are abs plastic and front and rear...
  3. N

    Oil Pump Replacement ( how to do it )

    Thanks guys probably is the crank shaft oil seal can I remove the crank shaft pulley without disturbing the timing and then remove the seal to replace it.
  4. N

    Oil Pump Replacement ( how to do it )

    Guys I have found my oil leak or I think I have. Its coming from the bottom ancillary belt pulley housing which I believe is the oil pump. Now can I change this without disturbing the timing belt ( I think not ) If I cant what do I need to lock the timing in position I have a timing positioning...
  5. N

    Rocker Cover Oil Leak Update (help please)

    aftermarket but put gasket sealer on both sides of seal and surely this would only leak once the engine is running not when left idle.
  6. N

    Rocker Cover Oil Leak Update (help please)

    no mate but put a smear of gasket sealer over both sides cover and cam shaft half moons if thats what you mean
  7. N

    Rocker Cover Oil Leak Update (help please)

    Ok guys here goes have now changed the rocker cover gasket and that leak is now fixed but there is another leak which is the main leak I was looking for, I will do my best to explain. Oil is now dripping down from under the timing belt inner cover. I have removed the timing belt cover and...
  8. N

    Rocker Cover Gasket Oil Leak Advice

    Guys I mean it is still leaking with the rocker cover off. It could be old oil finding its way to the bottom but I did give it a damn good clean. I am going to change the gasket today and see what happens. Just wondering what caused it or is it as it seems a common problem. My thoughts are that...
  9. N

    Rocker Cover Gasket Oil Leak Advice

    Guys have noticed oil leaking out from the back edge of the rocker cover and the spark plug recess was full of oil (and I mean full). Now the question obviously the rocker cover gasket needs replacing but after cleaning all around the engine and the rocker cover removed I am still getting oil...
  10. N

    Front Windows Not Closing Properly

    Hi Peoples Wondering if anyone has a similar problem both my front windows have started to close incorrectly. I have to stop them half way on closing and pull them straight and sometime they close with the window proud of the rubber seal which allows water into the back foot well. I have taken...
  11. N

    MOT emissions failure where do I start ?

    spoke to a ford dealer today and he suggested i changed the cat and the eco sensor (lambda) not surprised at £600 for a cat and £175 for the sensor. I know I can get these on ebay for £90 and £25 but are they any good anyone used an aftermarket cat. Anyone got an idea of what a scrap cat is...
  12. N

    Where did this part come from ?

    ok guys thanks will have to find one as I threw it away. Have more concerning issues with emissions I need to deal with first. It could end up a scraper. Thanks for the replys
  13. N

    Where did this part come from ?

    right lads you seem to know what it is but I still dont follow allows air to pass from where to where and do I need to worry about not having it.
  14. N

    Where did this part come from ?

    When changing one of my power steering pipes I found a piece of tubing lying in the engine bay. It is about 10" to 12"s long about a 6mm internal diameter and has two 90 degree bends either end sort of shaped like a bicycle handle bar with most of the length being straight. Probably makes no...
  15. N

    MOT emissions failure where do I start ?

    Hi Guys and Gals I have just put my puma in for its MOT I did all my prep work changed the wishbones, replaced the rear subframe bushes, cv boots, power steering pipes, rear flexi hoses, welded the the rear chassis and changed three tyres and yes all was good except for it failed on the...
  16. N

    ABS and Traction Control LIghts

    OK guys thanks will bleed the brakes and get back to you although looking at the weather it may take my a day or two I will let you know how I get on.
  17. N

    ABS and Traction Control LIghts

    Thanks for the reply I did remove the sub frame completely and replaced the rear brake flexi hoses as i could not get the other ones off without cutting them. (badly corroded onto mounting bracket). I have only moved the car about 30ft or so because the brakes havent been bled and only drove at...
  18. N

    ABS and Traction Control LIghts

    I had just had the rear sub frame out to replace the sub frame bushes. Now its all back together the ABS and traction control lights are staying on. The brakes have not been bled yet would this bring the lights on. I cant imagine that not having bled the brakes would cause this as how would it...
  19. N

    (next problem) Power Steering Pump

    update problem sorted, although the filler tank was almost full, as the pump was oscillating i just continued to add oil to the bottlle and eventually the air bubbles stopped and the pump ran ok must of had an air lock in the system.
  20. N

    (next problem) Power Steering Pump

    Update on my thoughts, on a previous post I wasnt sure were to put a small one way valve which I now know goes into the steering rack before you put the pipes back on. I have put this valve back and it looked like it would only fit one way but maybe it will fit in either direction. If it is...
Back
Top