Recent content by neilus123

if you send me your email or phone number I will get some pictures to you

Body kit for Ford Puma front spoiler, side skirts, rear bumper valance and rear spoiler all parts fit to existing panels and bumpers. You will need silicone sealer or something similar to bond it and a few self tapping screws. Sides skirts and rear valance are abs plastic and front and rear...

Thanks guys probably is the crank shaft oil seal can I remove the crank shaft pulley without disturbing the timing and then remove the seal to replace it.

Guys I have found my oil leak or I think I have. Its coming from the bottom ancillary belt pulley housing which I believe is the oil pump. Now can I change this without disturbing the timing belt ( I think not ) If I cant what do I need to lock the timing in position I have a timing positioning...

aftermarket but put gasket sealer on both sides of seal and surely this would only leak once the engine is running not when left idle.

no mate but put a smear of gasket sealer over both sides cover and cam shaft half moons if thats what you mean

Ok guys here goes have now changed the rocker cover gasket and that leak is now fixed but there is another leak which is the main leak I was looking for, I will do my best to explain. Oil is now dripping down from under the timing belt inner cover. I have removed the timing belt cover and...

Guys I mean it is still leaking with the rocker cover off. It could be old oil finding its way to the bottom but I did give it a damn good clean. I am going to change the gasket today and see what happens. Just wondering what caused it or is it as it seems a common problem. My thoughts are that...

Guys have noticed oil leaking out from the back edge of the rocker cover and the spark plug recess was full of oil (and I mean full). Now the question obviously the rocker cover gasket needs replacing but after cleaning all around the engine and the rocker cover removed I am still getting oil...

Hi Peoples Wondering if anyone has a similar problem both my front windows have started to close incorrectly. I have to stop them half way on closing and pull them straight and sometime they close with the window proud of the rubber seal which allows water into the back foot well. I have taken...

spoke to a ford dealer today and he suggested i changed the cat and the eco sensor (lambda) not surprised at £600 for a cat and £175 for the sensor. I know I can get these on ebay for £90 and £25 but are they any good anyone used an aftermarket cat. Anyone got an idea of what a scrap cat is...

ok guys thanks will have to find one as I threw it away. Have more concerning issues with emissions I need to deal with first. It could end up a scraper. Thanks for the replys

right lads you seem to know what it is but I still dont follow allows air to pass from where to where and do I need to worry about not having it.

When changing one of my power steering pipes I found a piece of tubing lying in the engine bay. It is about 10" to 12"s long about a 6mm internal diameter and has two 90 degree bends either end sort of shaped like a bicycle handle bar with most of the length being straight. Probably makes no...

Hi Guys and Gals I have just put my puma in for its MOT I did all my prep work changed the wishbones, replaced the rear subframe bushes, cv boots, power steering pipes, rear flexi hoses, welded the the rear chassis and changed three tyres and yes all was good except for it failed on the...