Hi,about to fit unichip to my FRP which needs to be wired direct to ecu so need to know wiring pins to following wires of unichip which are;
RED - Switched +12V supply (Y-Spliced into Injector 12V supply)
Brown - Ground shared with ECU (Y-Spliced)
PINK - TPS signal, ( Y-Splice)
White/Black Stripe - Signal from Crank Position Sensor Pin 1 (Intercept)
Green - Crank Position Sensor Pin 1 Signal to ECU
White/ Red Stripe - Signal from Crank Position Sensor Pin 2 (Intercept)
Blue - Crank Position Sensor Pin 2 Signal to ECU
Black - MAF signal from MAF Sensor (Intercept)
White - MAF Signal to ECU
pls advise thx