Recent content by hts

Would you be willing to split?

Just to update this thread: Problem has since been fixed. Borrowed a friends ECU; picked up an issue with the cam timing, took the rocker cover off etc; cam timing on the inlet was massively out (Upon closer inspection whoever had timed the engine previously didn't do either of the bolts that...

Cheers, also explained why it toped out at 95ish% at WOT

Thanks Rob, guess its not necessarily that then :-(

Update: I've bridged the pas pressure switch plug as suggested (Actually cut the plug off and connected the wires together), and it made a very slight difference in that the idle is now stable and doesnt fluctuate by 50-100rpm. As I had purchased a hand held code reader i plugged it in today...

Haven't had a chance to do anything on the car yet, will update this thread tomorrow!

Yes, since its been converted. Although, I did buy the project half completed but had since re-done almost the whole lot anyway. Thanks for the quick replies, I'll try the PAS plug at the weekend and post back here with the results. Regards, Dan

Got some strange issues with my puma converted zetec-s and wondering if any of you have any idea on whats wrong with it. So far I've tried replacing the ICV, TB and TPS, MAF, twice each (One from a working car and 2nd they were new). Also couldn't find any air leaks. PAS Pressure switch is...

Sent you an E-mail.

Have you still got this? Cheers Dan