Recent content by Bobby4Puma

Hey guys...anyone watching this thread? I wanna make a brake upgrade for my 2001 Puma and besides the st150 what other options do i have? Im not in the U.K. anymore im.in Romania...cheers

Bruv i think its the bloody VSS its causing a lot of problems...i checked for leaks everywhere...i bought a VSS aftermarket it worked fine for a short while then its causing problems again...i think i will get a genuine ford one so i wont bother...theese sensors are so poor if they are not...

Heya tnx for the reply , i manage to change it , i have another puma for spares , there is a bracket at the bottom at the radiator , unscrew it , lower it , then pop the fan out and then lower it and slide it :) now it works fine ...cheers

Quick question guys i need to change the radiator fan and i dont have a lift or something and i cannot see the screws or something...is it difficult to change the fan? It only starts on the second level and its screwing up my AC system putting too much pressure on it...cheers

Cheers mate thank you

Hello guys can anyone give me the ford oem code for the vss? Its a 2000 with digital dash...cheers

I got a 22 3/8 socket for the hego sensor and it worked perfect

Yup thats the one im.getting but i wanted to make sure its the right size :)

I see there is 22 and 1/2 , 22 and 3/8 ...

Wild E i found the culprit :( was mostly my fault cause i didnt check the VSS properly , the wires inside were mushed but the speedo and mileage were fine...after i disconnected the bloody vss the engine runs smooth as it should

Hello guys i need to change my o2 sensor and i want to buy a proper key but im.kinda confused on the size of the key...cheers .... Is it 22mm?

Thanks Red...i have the same issue and its driving me nuts...i tried looking for leaks with the brake cleaner and i find none :(

B are u still on here? Mate i have the same issue and its driving me nuts... Wild E tried to help me but i couldnt find the problem :( i have a feeling this is caused by a leak somewhere but i couldnt find it...u didnt say if u fixed your problem and how u fixed it :(

I just did that earlier...when i moved it while the engine was running i could hear the leak...i put some silicone around it...cheers :)

Hello guys , the brake booster is hissing after i turn off the engine. Brakes are fine while driving. Also when im coasting in neutral the idle sits higher than usual and revs are going up and down 1300-1600 rpm. No leaks on the manifold side . No hissing while driving... Check valve gone bad...