ScubaSteve
Active member
- Joined
- May 8, 2010
- Messages
- 3,749
Im selling the 300mm conversion calipers. These have had new seals, slide pins etc within the last 6 months, have been stripped down completely and cleaned, see my project thread for pics of this
They come with hoses, pads with plenty left on them, and bolts to bolt them to the car. I also have discs which if you are collecting in person are welcome to take they havent much wear on them other then surface rust which will disappear as soon as you use them, but they arent worth posting too heavy,
Fitting is straight forward see my guide here
http://www.projectpuma.com/viewtopic.php?f=51&t=7991" onclick="window.open(this.href);return false;
And I will also throw in the 12.5mm drill bit needed to enlarge your knuckles for an extra £5er
Cost: £115 posted, or £100 collected. + £5 for drill bit if required.
Based in Worcester
PM me if interested this is a great conversion
They come with hoses, pads with plenty left on them, and bolts to bolt them to the car. I also have discs which if you are collecting in person are welcome to take they havent much wear on them other then surface rust which will disappear as soon as you use them, but they arent worth posting too heavy,
Fitting is straight forward see my guide here
http://www.projectpuma.com/viewtopic.php?f=51&t=7991" onclick="window.open(this.href);return false;
And I will also throw in the 12.5mm drill bit needed to enlarge your knuckles for an extra £5er
Cost: £115 posted, or £100 collected. + £5 for drill bit if required.
Based in Worcester
PM me if interested this is a great conversion
