breaking ford racing puma and second shell for sale!

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

xrsi

New member
Joined
Nov 18, 2010
Messages
40
Location
oswestry Shropshire
I have decided to break my racing puma i was going to reshell into a less damaged shell than the one that it currently is due to a cat c write off.

The car has everything apart from bonnet as i got all the rest of the bits to repair before having a change of heart and deciding to break and put the money towards a very tidy none written off car.

The car has done just over 30k although does not have the history as the last owner did not leave it with the car, there was a 7k refurbishment of the car very shortly before it was written off and the whole car was immaculate!

The interior is free from marks or bobbles apart from the normal wear on the steering wheel.

car is still complete at the moment as i have only just decided to break.

All parts are for sale however i will not split the following so please do not ask me to:

INTERIOR - will sell steering wheel speperate but front and rear seats and the door cards and 1/4 trims are going as one
Engine - will be sold with inlet, ecu and loom complete with transponder fob
Front brakes - will not spolit the calipers from the disks and pads all sold as one.
Rear brakes - again stub axles calipers disks and pads are all to be sold as one and would prefer to sell with beam complete.
Wheels - i have a set of 5 and again will not split.
All parts are prefereed for collection and are located near oswestry in shropshire - however i can courier at buyers cost and if body parts are sent it is at buyers risk due to size and fragility of them.

Also in addition to the above breaking i also have a replacement shell that is 99% ready to use and comes with extensive service history, there was slight damage to the inner arch by a pillar on drivers side where wheel had hit, all the damaged area has been cut out using a spot weld drill buit and is ready to replace, i have all the parts off the one i am breaking so will come ready to weld on and then paint. i would prefer to sell the sell complete but i could cut the 1/4 panels off etc if there was no interest.

I will update here with pictures etc as i remove parts but in the mean time if there is anything you are afterplease either reply here or drop me a txt on 07891848777 and i will reply as soon as i can

i will update with complete list of parts as they are removed etc but to get the ball rolling the following prices are for parts:

Engine, as stated above complete with ecu loom and inlet £1250
Alcon Front brakes complete £500

Front bumper £300 minus splitter
th_09052011692.jpg


None genuine front splitter £75

boot lid - £50
th_09052011705.jpg


Front wings £150 each (very small dink in passenger side easy repair)
th_09052011697.jpg

th_09052011698.jpg

th_09052011694.jpg


Drivers door bare - £40
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/09052011700.jpg

Passenger door bare - £40
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/09052011701.jpg

Electric drives side mirror - £30
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/09052011699.jpg

Racing puma fuel filler flap - £50
th_09052011704.jpg


Rear light clusters - £20 each

Drivers side door handle - £15
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/17052011908.jpg

used but excelent condition o/s rear 1/4 panel - offers

Interior complete minus steering wheel £1000 ovno its like new!!!
th_09052011734.jpg

th_09052011730.jpg

th_09052011722.jpg

th_09052011721.jpg

th_09052011719.jpg


steering wheel - normal wear - £50
th_09052011723.jpg



Rear brakes complete with rear beam £200

Set of 5 standard alloys, 1 needs a refurb but was my spare £400
2 nearly new eagle f1's, 2 hankock ventus nearly new and spare cant rememberbut very legal just inner edge wear.
th_06052011683.jpg

th_06052011681.jpg

th_06052011679.jpg

th_06052011678.jpg


Rear bumper, scuffs to paint but no damage to bumper - £100
th_29052011957.jpg

th_29052011958.jpg


Front hubs - £50 each
Lower arms - £150 pair
drive shafts - £200 pair
suspension - offers

Suspected standard mid section with sports cat, slight repair by flange - £100
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/09052011708.jpg

Drivers side arch liner - £50
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/09052011702.jpg

drivers side electric window reg - i have 2 of these! £20

Passenger side electric window reg £20

Drivers side central locking motor and latch - Have 2 of these £15

Passenger side central locking motor and latch £15

Parcel shelf - Excelent condition £20
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/09052011727.jpg

Puma gear knob good condition - £10
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/09052011729.jpg

Silver dial surround - £20
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/09052011720.jpg

Silver air con heater panel - £20
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/09052011728.jpg

Indicator and wiper stalks - £15
http://img.photobucket.com/albums/v203/t3fiesta/racing puma breaking/09052011726.jpg

Second shell complete with parts to fix - £250 (complete with rear 1/4 panels - these are worth more than this alone!!!)
th_DSC00929.jpg

th_DSC00931.jpg

th_DSC00932.jpg

th_18012011160.jpg

th_28122010038.jpg

th_11122010018.jpg


Thanks

James
 
hi, is 75 the lowest you would take for the non genuin splitter? ans is it still available?
and does it look the same as the frp one?
thank, Matt
 
Just thought I would add, recommended seller, myself and Jay have had parts from him

Simon
 
Hi,

I'm interested in just the cigarette lighter socket, not the entire aircon panel. Is that possible to split?

Cheers,
Rob
 
hello
are you still selling these rear brakes complete with rear beam ?
 
Hi there,
I guess I am a bit late but....
I am new to the site and wondered if you had any body panels left for sale.

I have a puma thunder and am considering the maths about whether to sell and buy a FRP or to buy the panels and change the look of mine.
I assume 2 wings+front bumper and 2 rear qtrs +rear bumper will do the job....and will fit?


regards, chris
 
Ooh... I'd love to refit my Thunder with all that lovely blue interior one day.

Shame I missed this - looked perfect. You did well there Flying Scotsman!
 
I assume 2 wings+front bumper and 2 rear qtrs +rear bumper will do the job....and will fit?

That's fine but you also need to consider the width increase. FRP has rear spacers and longer front wishbones, modified knuckles, longer driveshafts, different suspension etc.

I thought about this once. I bought the FRP :p
 

Latest posts

Back
Top