Ford Puma to racing conversion

[warriorwithin]

Hi, Im planning to convert my entire Ford Puma to a Racing one, I am missing only the driveshaft atm.

The problem is that to change the shaft I have to change the knuckle and maybe something else too it seems... so do anyone have a suggestion which are the parts that need to be "adjusted" or better changed for a clean installation to finally fit the FRP driveshaft without having troubles?

Hope I could be clear, sorry for my technical bad english but Im from ITaly!

 

[Flying Scotsman]

You will need the knuckles.

 

[bigal82]

You will need the knuckles.

To make the driveshafts ( longer) work you need, the Frp knuckles as they are bored out to an angle to fit the wider stance, Frp wishbones and Frp track rods although focus track Rods can be used.

 

[warriorwithin]

You will need the knuckles.

To make the driveshafts ( longer) work you need, the Frp knuckles as they are bored out to an angle to fit the wider stance, Frp wishbones and Frp track rods although focus track Rods can be used.

Ehi thanks for reply!