frp 'toe' / tracking values????
- Thread starter jacko
- Start date
Help Support ProjectPuma:
Hope this helps.
Ride Height Specifications
Condition Front Rear
Nominal curb height (wheel center to fender, measured at wheel centerline) 375 mm 378 mm
Front Wheel Alignment – Castor and Camber
Condition Values In Castor Caster Camber Camber
Nominal Tolerance Range Nominal Tolerance Range
Nominal curb height Decimal degrees 2.92° ±1.25° -1.05° 1.10°
Nominal curb height Degrees and minutes 2°55.2' ±1°15' -1°3' 1°6'
Maximum variation - left to right-hand side - Castor 1.00° (1°00') Camber 1.25° (1°15')
Front Wheel Alignment – Toe Setting
Values In Allowable Tolerance Setting Adjustment
mm 4 mm Toe in (2 mm per side) ± 1.0 mm
Degrees and minutes -0°40' Toe in -0°25' Toe in ± 0°10'
Decimal degrees 0.67° Toe in -0.41° Toe in
Rear Wheel Alignment - Camber
Condition Values In Camber Camber
Nominal Tolerance Range
Nominal curb height Decimal degrees -1°00' -0.50° to -2.00°
Nominal curb height Degrees and minutes -1°00' -0°30' to -2°00'
Maximum variation - left to right-hand side - Castor 1.25° (1°15')
Rear Wheel Alignment - Toe Setting
Nominal Tolerance Range
0.46° Toe in 0.79° to 0.13° Toe in
3.0 mm Toe in 5.0 mm to 1.0 mm Toe in
Torque Specifications
Item Nm lb-ft lb-in
Tie rod end lock nut 63 46
That should be all the Values you require.
Enjoy,
chris.
Ride Height Specifications
Condition Front Rear
Nominal curb height (wheel center to fender, measured at wheel centerline) 375 mm 378 mm
Front Wheel Alignment – Castor and Camber
Condition Values In Castor Caster Camber Camber
Nominal Tolerance Range Nominal Tolerance Range
Nominal curb height Decimal degrees 2.92° ±1.25° -1.05° 1.10°
Nominal curb height Degrees and minutes 2°55.2' ±1°15' -1°3' 1°6'
Maximum variation - left to right-hand side - Castor 1.00° (1°00') Camber 1.25° (1°15')
Front Wheel Alignment – Toe Setting
Values In Allowable Tolerance Setting Adjustment
mm 4 mm Toe in (2 mm per side) ± 1.0 mm
Degrees and minutes -0°40' Toe in -0°25' Toe in ± 0°10'
Decimal degrees 0.67° Toe in -0.41° Toe in
Rear Wheel Alignment - Camber
Condition Values In Camber Camber
Nominal Tolerance Range
Nominal curb height Decimal degrees -1°00' -0.50° to -2.00°
Nominal curb height Degrees and minutes -1°00' -0°30' to -2°00'
Maximum variation - left to right-hand side - Castor 1.25° (1°15')
Rear Wheel Alignment - Toe Setting
Nominal Tolerance Range
0.46° Toe in 0.79° to 0.13° Toe in
3.0 mm Toe in 5.0 mm to 1.0 mm Toe in
Torque Specifications
Item Nm lb-ft lb-in
Tie rod end lock nut 63 46
That should be all the Values you require.
Enjoy,
chris.
