Heater control panel

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Gremlin

New member
Joined
Mar 15, 2009
Messages
27
Location
Colchester Essex
hopefully a simple one here looking at adding a heater panel with aircoin switches in to a car that doesnt have them.
Yes every thing works ( aready tested )
added bonus the switches also light up as well so looms are there .

next question . I would like to hard wire my sat nav in and as the ciggy lighter socket is permantley on these switches would be ideal.

So keeping it simple does anybody know what wires do ehat on the multi plug please?
or where the looms end up so i could run back from the original loom plug.

Thanks in advance Simon
 
Why are you wanting the air con switches if your Puma doesn't have it?

Sat nav ciggy lighter thing sounds like a good idea though, I'm always knocking mine out...
 
As you said your self. i keep knocking mine ot and would prefer it to be out of way and hard mounted/ Wired.

My plan is using the aircon switch or air recycler switch for this purpose. Even more so as the ciggy lighter is live 24/7 so there would not be a drain via the sat nav adapters light however small it is .

Also wanted to wire either neons or interior mood lighting via the other switch so as to still maintain the original look (so to speak0 rather than maplins/halfords add on switches...

hope that explains it a bit better.
 
Brilliant thinking, forgot the ciggy switch is always connected :roll:

Good luck with it! I'm no expert in auto electricals myself, but I'm sure there'll be some forum members on call if you need a hand ;)
 

Latest posts

Back
Top