How To Unlock Your Digital Dash Display In Ford Cars

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

v0y4ger

New member
Joined
Mar 3, 2010
Messages
36
Location
Chasetown, Staffordshire
Haven't had a go at this yet, apparently it works on any ford with the green LCD at the bottom of the clock.

How To Unlock Your Digital Dash Display In Ford Cars
The Self Diagnostics Mode gives you in-depth information about your
engine and the actual numbers in digital. To use it, follow the steps:

* Insert Key but do not turn it on

* Press and hold the Trip Meter Reset Button

* While holding the reset button, start your car and continue
holding the button

* Within 10 seconds, the display should change to "test" in LCD font
and the needles will do a full sweeping. Release the Button

Pressing the button will now cycle through some 17 different modes

* 1.Shows a Gauge Sweep
* 2. Shows all 8's on the LCD (LCD TEST)
* 3. Illuminates all the bulbs on the dash
* 4. Displays hexadecimal value for ROM level
* 5. Displays the hexadecimal value for EE level
* 6. Shows DTC (Diagnostic Trouble Code)
* 7. Digital Speedometer - mph
* 8. Digital Speedometer - kph
* 9. N/A
 
There's a "How to put your digital display into diagnostic mode" >here< including video.

;)
 
Back
Top