danswain
New member
- Joined
- Nov 24, 2010
- Messages
- 5
My car has died and i can't afford to repair it.
MOT ran out last month. You will need to trailer it away.
I have the Last 3 MOTs and many more from over the years.
Endless recipts and service sheets
Original manual and details.
No Battery, No Exhaust from the 4-2-1 manifod Back.
The bottom end has gone on this engine. Went mid July 2012
If you bring a battery it will start and you can hear the noise.
1 Remote key 1 Normal Key.
Only works on the remote key.
Interior is stock with Puma Carpets
Heated Front Windscreen screen & Electric Mirrors
--------------------------------------------------------------------------------------------
Original Equipment Ford Clutch and Slave cylinder (Replaced 2010)
Original Equipment Ford Heater Control Valve (Replaced 2010)
Original Equipment Ford Rear Axle Handling Upgrade 12.5mm (2011) [Not standard but it is an OE Ford Product]
Bottom Arms (Replaced 2011)
Brake Shoes (Replaced 2011)
Rear ABS Sensor (Replaced 2011)
Front and Rear top mounts (Replaced 2011)
--------------------------------------------------------------------------------------------
Everything is standard on the car except:
Ford Puma 260mm Calipers[This age Puma came with 240mm brake calipers]
Braided Hose Kit - Goodridge (2011)
Front Discs 260mm MTEC Grooved and Drilled (2011)
Mintex Pads (2011)
Milltek Sport EVO 4-2-1 Manifold (2011)
K&N 57I Cone Filter (2011)
Denso Iridium High Power Spark Plugs (2010)
Magnecor Plug Leads Puma (Red 8.5mm) (2010)
Gates Cambelt (2011)
Rear Axle Handling Upgrade 12.5mm (2011)
Weitec GTN Semi coil over suspension Puma eye mount (2011)
Bluefin Remap (original £240 unit comes with the car)
1ltr-ish of Castrol Magnatec 5w-30
I want over £99 pounds for it via the auction
I live near Wigton in Northwest Cumbria.
Please contact me through Project Puma or Ebay
Photos and link is: http://www.ebay.co.uk/itm/Modified-...rParts_SM&fits=Model:Puma&hash=item20ce8cdbc5
MOT ran out last month. You will need to trailer it away.
I have the Last 3 MOTs and many more from over the years.
Endless recipts and service sheets
Original manual and details.
No Battery, No Exhaust from the 4-2-1 manifod Back.
The bottom end has gone on this engine. Went mid July 2012
If you bring a battery it will start and you can hear the noise.
1 Remote key 1 Normal Key.
Only works on the remote key.
Interior is stock with Puma Carpets
Heated Front Windscreen screen & Electric Mirrors
--------------------------------------------------------------------------------------------
Original Equipment Ford Clutch and Slave cylinder (Replaced 2010)
Original Equipment Ford Heater Control Valve (Replaced 2010)
Original Equipment Ford Rear Axle Handling Upgrade 12.5mm (2011) [Not standard but it is an OE Ford Product]
Bottom Arms (Replaced 2011)
Brake Shoes (Replaced 2011)
Rear ABS Sensor (Replaced 2011)
Front and Rear top mounts (Replaced 2011)
--------------------------------------------------------------------------------------------
Everything is standard on the car except:
Ford Puma 260mm Calipers[This age Puma came with 240mm brake calipers]
Braided Hose Kit - Goodridge (2011)
Front Discs 260mm MTEC Grooved and Drilled (2011)
Mintex Pads (2011)
Milltek Sport EVO 4-2-1 Manifold (2011)
K&N 57I Cone Filter (2011)
Denso Iridium High Power Spark Plugs (2010)
Magnecor Plug Leads Puma (Red 8.5mm) (2010)
Gates Cambelt (2011)
Rear Axle Handling Upgrade 12.5mm (2011)
Weitec GTN Semi coil over suspension Puma eye mount (2011)
Bluefin Remap (original £240 unit comes with the car)
1ltr-ish of Castrol Magnatec 5w-30
I want over £99 pounds for it via the auction
I live near Wigton in Northwest Cumbria.
Please contact me through Project Puma or Ebay
Photos and link is: http://www.ebay.co.uk/itm/Modified-...rParts_SM&fits=Model:Puma&hash=item20ce8cdbc5
