Suspension bush removal & replacement tools

[ian cox]

Hi,
I am looking to buy a bush removal and replacement tool for the rear and front suspension beam lower arm bushes.
Are there any recommendations for tools that press out and then press in the new bushes on these suspension components.

Thanks and kind regards Ian

 

[DOH]

They will come out using 2 large sockets on the lower arms on the front , 1 the size of the bush the other much larger than the bush . use with a long m12 ( High Tensile if possible)threaded bar & nuts and washers. The bush will be pulled through the arm and inside the bigger socket. The Rears can be very difficult to remove and often have to be destroyed to get them out