Recent content by Jamesgti14

Im gutted if i haf storage id keep it forever literally

I knew there would be something id forgotten ! I spaced all 4 wheels out 20mm with hubcentric spacers so the wheels would fit perfectly, also fitted 55mm long studs (20mm longer than the original wheel studs) and changed both front bearings at that time (as they were destroyed to dis assemble...

i bought this Puma from a lady owner in April 2016. It started out totally standard, however the brakes were terrible (as are all standard Fiestas, Pumas and KA's) so I fitted Focus ST170 300mm Front discs and Mondeo ST220 Callipers, carriers and pads. there was still too much pedal travel so i...

Sorry bud, im in barnham , west sussex. Thanks

Here i have my ford puma for sale. 118,000 on the clocks but the engine has been rebuilt 2000 miles ago. 1.7 Litre (VCT) engine designed by ford and Yamaha, approx 140bhp as it is now. Where to start... i have fitted Focus ST170 300mm front brake discs and Mondeo ST220 callipers, 2x new wheel...

I have just spotted a flaw with my 20mm spacing ! Whilst on a hydraulic lift i noticed that on full lock the tyre touches the lower arm... oops... so i would reccomend 25mm - 30mm spacing now. The tyres also touch slightly on the wheel arch lining

Ok so after seeing that the servo moves a lot under braking with new setup , which in turn causes excess pedal travel, so I decided to make a custom bracket to secure it somewhere to the body to relieve the pedal travel. Here it is, it was a quick half hour job doesn't look pretty but I will...

If anybody does this modification i recomend also making a servo brace to further relieve brake pedal travel. I made one today , just a 3mm thick length of metal with 2 holes cut out (they bolt onto the master cylinder itself) and then a smaller piece of metal welded to the end which bolts onto...

Check.out my post on "fitting st170 wheels" you'll se I have the rear window spoiler. Looks fine to me. And I'm not.being funny.but if.there.is any.increase. in drag, I. Don't notice it 1 bit what so ever

I'll buy a spare bumper first then haha!

It did it before even with the 258mm discs and original servo.

Hi all! Just a brief one for those who wish to change their wheel studs to compensate for spacers. Firstly do the usual, remove calliper carrier bolts and then cable tie the calliper and carrier together onto the Coil spring or wherever is out of the way, then remove the ABS sensor from the...

You cant miss it now, Has a Spoiler on the rear window and a set of White Focus ST170 17" Wheels, Stands out a bit now!

I often flash at puma's but most of them are driven by people that don't share our enthusiasm :P