Search results

ATP ABS WHEEL SPEED SENSOR, REAR AXLE WIDTH FOR FORD FIESTA BOX 98-03 PUMA 98-03 15-07-2022 Ebay (9 left today) (ATP spares). £15.46 inc. VAT/postage all the way from Germany BARGAIN! These are tricky things to replace as the fixing bolts rust into the hub flange, causing a headache to...

Well Well Rear Bearing gone! on a long run due to heat! The last bearings were Nordic, well that's what the Ad said. Had loads of grease on as well. The grease melted, it was HT grease for W/bearings as well. The new ones Ad said Ford but not from ford directly, will see how these go, my...

Done my drums/bearings again, once down to just drum and shells started by tapping out the back shell out from the front (which is deeper in). A curved corner helps getting a large flat sided screw driver on it. I kept turning the drum 90 degrees using the studs as a guide, drum against my knee...

Hi again Been told by garage my rear bearings are showing signs of wear and best get bears changed.Not sure why but am about to do the job again only this time I hope to get the old inner shells out (not new drum now) so tap tap method :-0 When it comes to putting the new outer shells back in...

Hi just want to add some practical advice on this subject of drum bearing swap, don't think about old drums, not worth the trouble just get new ones originals must be scrap by now! done my rear drums (new) did consider going to a garage to press the inner bearing collars, but I read more on the...

HI All Just a word of warning with the high pressure power steering tubes in which the pressure switch sits right under the front of the car! The metal tubes rust like hell over years and messing with the switch could start a leak. But bypassing the switch wires could mean the pressure...

That is the sort of wiring you would need, sounds like a good idea. beats driving round like a sitting duck, and brings lighting into the 21st century :grin: Good luck with that, better do it soon, these dark days. Looks like this:

Hi Daylight driving lights should at least have a switch to knock them off at night, new cars do it automatically of course. But what I wanted to say is the best place for them is in the headlight unit itself, high up about 10cm strips of LED lights (one per side) put into one of the...

BTW You can see my Puma on here if you look for 'LUCAS SQ8 SPOTS' a Melina 1.7 only 76k for £550 MOT on the road 2 years ago. Had belts and clutch done to be on the safe side, that's all. I patched rear arches them up with filler but a proper job is needed. I also had a S reg escort that was the...

I was referring to the 206 front wings bit old now.

Hi Very true, the penny will drop one day soon and every one will want one. Pretty rust free but I will do the back half of the sills next year, have them ready from Mike Stuar, doing it myself as it is only plug welds. Thinking of doing the Puma rear arches as well, not that hard with care...

Some pic's

Hi You can't beat the late 90's for great British design and engineering, making Fun cars still around today for peanuts? Both have VVC/VTC engines but the MGF beats my Puma hands down for all round performance, still the Puma 1.7 is great as well. Both great on petrol. Pity I end up paying...

Hi Long shot but it may be as simple as the thermostat sticking open and the rest of the system trying to sort it out. One up to temperature no problems? Just the colder weather making it more important now. Orion

Hi Ricardo How are your rear arches in the sun? The rain wrecks ours hear in the UK :? Have fun! Orion

Hi David I use cheap standard tyres,but good all weather (in wet) on the front,need grip in winter. Headlights are crap, I use HID just to see, adjustment as standard fitted, I have no probs, swop at MOT time. That's my choice no matter what anyone else says (heard it all...

Having worked at Lucas in the day and always fitted SQ8's to what are now classic cars thought I would give my puma a much needed legal boost to it's lighting. I think you will agree they suit it! Don't like massive round lights nor dead square ones. Much more vintage as the puma slips in the...

Hi You may have read I stripped KA sport seats to cover my Puma standard seats, the Puma base's are deeper and my drivers seat had a height adjustment motor/switch in it. You will find you sit higher than your simpler KA seats with adjustment to go even higher! Hope your not too tall. You...

Hi I brought some ‘Rubber-Moulded-set-of-4-Rear-and-Front-Mud-Flaps-for-Ford-Puma’ off wingmirrorstore on Ebay £11.99 for a front and back full set. Have fitted the front ones a year ago with self tappers and bit of glue, still on well, front are more important to save sills. I have the back...