Ive had a 2ltr throttle body fitted to my Puma for a few months now so I thought it was about time I did a fitting guide.
The 2ltr mondeo tb is on the left.
Firstly you have to turn the throttle position sensor round cause it catches the manifold and you can bolt the tb down.
I trial fitted the tb to make sure the engine would rev and idle ok.
The 2ltr mondeo tb is on the left.
Firstly you have to turn the throttle position sensor round cause it catches the manifold and you can bolt the tb down.
I trial fitted the tb to make sure the engine would rev and idle ok.