How do I remove the stock cd player?

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bigJ

New member
Joined
Nov 12, 2010
Messages
64
Location
Peterborough
I'm sure its been covered on here somewhere before but haven't seen it. Just bought myself one of these:

images


I'm sure i'll be able to figure out the wiring, but how do I remove the stock cd player so I can get it in? :?
 
You'll need the stereo removal forks, available on eBay relatively cheap. Then they insert into the four square holes, and you pull the stereo out.
 
you will need a facia adaptor,dont get the 1 that just fills the bottom of the gap get 1 that also fits around the hole,and a wiring loom aswell,both of ebay and very cheap
 
to connect the new stereo to the original wiring for the old stereo which saves you having to chop wires and ask for wiring diagrams
 
lol..you basically just new to convert the ford plug to a standard iso fitting...

personally iv'e just chopped the wires and converted the loom into a single 'sony loom' specific to my radio..it makes the wiring a hell of a lot tidyier back there.... as you will have a lot of connection blocks to cram in there when using the conversion leads...

:grin:
 
puma king said:
you mean this?
1188-2.jpg
NO that is a complete wiring loom,if you had looked on ebay for the facia adaptor you would have also found this
http://cgi.ebay.co.uk/PC2-08-4-Ford-Stereo-ISO-Harness-Adaptor-Lead-/160436678968?pt=UK_Cars_Parts_Vehicles_Terminals_Cabling_ET&hash=item255ac57138" onclick="window.open(this.href);return false;
 

Latest posts

Back
Top