Rear lights

[Adamlagoe]

Is there a way to take off the plastic lens on the rear lights and if so how easy?

 

[alexwilliams840]

Not easy at all, wouldn't advise it. It's easier to cut the lense holders out if you want to access the cover and then glue them back together

 

[pumad]

you really don't want to do that... very likely that you mess up your whole unit...

cutting the back of the lens open, with a saw and a dremel is the best way.
then you can push out the orange lens.. With care! then you can put a white lens in... and pull this up with some fish thread...

and it will look like this.

 

[YOG]

Not easy at all, wouldn't advise it. It's easier to cut the lens holders out if you want to access the cover and then glue them back together

Here's the link:
http://www.projectpuma.com/viewtopic.php?p=16025#p16025" onclick="window.open(this.href);return false;

 

[alexwilliams840]

Yeah i have done this too, very easy and looks great

 

[Anonymous]

Is there a way to take off the plastic lens on the rear lights and if so how easy?

Simple answer...... Don't waste you time trying.

Even if you can get them sealed up properly, they'll never be the same again.
You'll lose the structural integrity of the fitting. It will bend and warp in the hot sun (if it exists) which will cause the front clear lense to crack.

I've opened a few sets to put LEDs in and each set had to be remade.

 

[Adamlagoe]

Ohh right well it seems like its a waste of time so I will leave it how it is