JonB
New member
I had to change the tone rings to Puma ones and chop the standard sensor ends around to get them to go deep enough to read the rings in order to get my ABS working.
It was explained to me that Focus uses a digital signal (square wave) where as Puma uses analogue signal (sine wave) so you can not mix and match the systems.
I kept Puma metal lines, I used Puma front hoses to feed the rear calipers but removed the brackets.
It was explained to me that Focus uses a digital signal (square wave) where as Puma uses analogue signal (sine wave) so you can not mix and match the systems.
I kept Puma metal lines, I used Puma front hoses to feed the rear calipers but removed the brackets.