Ecu pinout

[Dziku]

Can anyone have pinouts for muff and tape ecus?
I'm in the proces adapting 1.7 to focus, and i need to repin focus loom. I have muff ecu, but if will not work with focus digital clocks i'll switch to tape, i should...

 

[Wild E. Coyote]

Something like this? :wink:

This is for TAPE, don't have MUFF, sorry

Pin no. Connects to Wire colour REMARK
2 Instrument cluster BK/BU, 0.75
12 Instrument cluster WH/RD, 0.75
13 Data Link Connector (DLC) BN/RD, 0.75
15 Data Link Connector (DLC) BU/WH, 0.75
16 Data Link Connector (DLC) GY/VT, 0.75
17 High speed engine cooling fan relay BK/WH, 0.75
19 Passive antitheft transceiver module GY/OG, 0.75
20 Injector 3 BK, 0.75
21 Crankshaft position sensor BK, 0.75
22 Crankshaft position sensor BK, 0.75
24 S12 (G1 = ground 1) BK/YE, 0.75
25 S90 (G9) BK, 0.75
26 DIS Ignition coil BK/OG, 0.75
27 Ignition switch BN/RD, 0.75
27 Start inhibit relay BK/RD, 0.75
30 Battery junction box, power(30A) WH/BK, 0,75
31 Power steering pressure switch WH, 0.75
35 Post catalyst Heated Oxygen Sensor HO2S WH/RD, 0.75
36 Mass air flow sensor (MAF) BN/BU, 0.75
38 Engine coolant temperature sensor (ECT) BK, 0.75
39 Air charge temperature sensor (ACT) BK, 0.75
40 Fuel pump relay (via inertia swicth) VT/BK, 0.75
41 A/C compressor cycling switch VT/BU, 0.75
42 Clock BK/OG, 0.75
45 Camshaft timinig actuator BK, 0.75
48 Instrument cluster WH/BK, 0,75 Tachometer
51 S12 (G1 = ground 1) BK/YE, 0.75
52 DIS Ignition coil BK/GN, 0.75
53 Passive antitheft transceiver module WH/GN, 0.75
54 Fuel pump relay BK/BU, 0.75
55 Power (3A) OG/YE, 0.75
58 Vehicle speed sensor (VSS) WH/BU, 0.75 Same signal goes to instrument cluster as well! -> speedo
59 O5 generator BK, 0.75
60 Pre catalyst Heated Oxygen Sensor HO2S WH, 0.75
64 Clutch pedal position switch BN, 0.75
67 Canister purge solenoid valve BK/OG, 0.75
68 Engine cooling fan relay BK/BU, 0.75
69 A/C WOT relay BK/YE, 0.75
70 Injector 1 BK, 0.75
71 S283 (post MAF) BK/YE, 0.75
76 Camshaft position sensor BK, 0.75
77 S12 (G1 = ground 1) BK/YE, 0.75
80 Instrument cluster WH, 0.75 PIN 75 is used before 09/2000 -> temp. gauge
83 Idle speed control valve BK, 0.75
85 Camshaft position sensor BK, 0.75
86 Dual Pressure switch BK/BU, 0.75
88 Mass air flow sensor (MAF) WH/BU, 0.75
89 Throttle position sensor (TPS) BK, 0.75
90 Throttle position sensor (TPS) BK, 0.75
91 Power steering pressure switch BN/RD, 0.75
93 Pre catalyst Heated Oxygen Sensor HO2S BK/YE, 0.75
95 Injector 4 BK, 0.75
96 Injector 2 BK, 0.75
97 S283 (post MAF) VT/YE, 0.75
100 Post catalyst Heated Oxygen Sensor HO2S BK/BU, 0.75
103 S12 (G1 = ground 1) BK/YE, 0.75

 

[Dziku]

Great, exactly lik this. Thanks