Front bushes

[ElDude at Allison Automotive]

You need a press really.. the fully shouldered bush in the rear socket (as per standard) is better in my opinion...

the small front one works really well with powerflex in there..

 

[ElDude at Allison Automotive]

A hammer and the right size bar may work on wacking out the small front bush...

don't think a hammer will cut it for placing the rear bush though...plus, if you grab the arm in a vice and start clobbering it it, you can bend it all over the place...(speaking from experience..lol )..



There is a specific tool available through SPX for doing the rear bush..personally, i use my own custom made lump of steel and a supporting ring underneath the arm so it doesn't bend it ..