when i have buy my 1.7 puma,
i had aftermarket fog light install by one of the previous owner.
but the custom wiring is just a piece of crap ... no relay, no fuse just 2 direct wires from the genuine fiesta button inside
wired on a wire of the interior light :roll: and one of the fog light is dead, so i unistall the complete system.
if you want to put fog light on a car, you need to take good wire like 2,5mm2 a fuse support or use a genuine fuse support and a relay in the fuse box under the bonnet for the power,
for the switch, you can use classic wire.
for the connector of the genuine fiesta switch if you don't found a fiesta front swich, you can use an connector of rear fog light or
rear defrost (i don't remenber) and just delete a little plastic part inside: the switch perfectly fit on it.
and if someone know a good choice of fog light or hight beam light for the puma, help me
i don't know what is good or what is crap into all this choice :
https://www.google.fr/search?q=fog+light+universal+car&rlz=1C1AVSK_frFR600FR600&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiJ3YHey8bZAhVK3KQKHQKLBt4Q_AUICigB&biw=1536&bih=779#imgrc=6i1tWFc6gT5QcM:
https://www.google.fr/search?rlz=1C1AVSK_frFR600FR600&biw=1536&bih=779&tbm=isch&sa=1&ei=5pOVWt7pNMLwgAb2-qLwCw&q=high+beam+light+universal+car&oq=high+beam+light+universal+car&gs_l=psy-ab.3...3939.6603.0.7107.9.8.1.0.0.0.78.531.8.8.0....0...1c.1.64.psy-ab..0.0.0....0.T0rSoKxQ3fU#imgrc=EhsmuvPYxpQA7M:
thank you for your help