FRP kit, track difference??????????/

[aberdarepuma]

im trying to gather info for the frp kit coversion i cant find measurements on how much further i need to space the wheels out, i deally i wld like to do it all with hubcentric spacers and longer studs if possible, can any1 shed sum light on how they have widened their track and by how much,

Thanks darren :grin:

 

[Flying Scotsman]

What width are you wanting to achieve?

I have 1 puma with FRP front standard width and 30mm spacers on the rear and a standard puma with 15mm on the front and 30mm on the rear. The standard puma I am not considering the longer wishbones etc as the stance is fine and handles well as is.

 

[aberdarepuma]

sorry i duno what you mean there i wan to get my track the same as an FRP currently its standard puma, i will be puttin FRP arches on so i want the wheels to fill out the arches no seem lost

 

[Flying Scotsman]

Well standard rear on the FRP is 20.5mm, press cars are 30mm
Front wishbones are an extra 25mm longer. I do not know what the driveshafts were extended to or what the hubs were bored out to.

 

[aberdarepuma]

ok cheers mate