I've researched this loads and can see the HCV is a common issue.. I've replaced this as I'm only getting hot air. However no change. Tested the new and old HCV by connecting 12v and can hear both clicking on and off.
I'm happy they're not the issue... Checked the voltage going to the HCV. Got the flowing results.
Dial set to hot - 13.7
Dial set to cold - 8.9
Middle setting.. . Fluctuates between the above two.
All interior electrics are working so assuming fuses are fine.
Why on earth am I seeing 8.9 volts on the cold setting. From what I've read it should be near 0.. Can't work it out???
Many thanks
I'm happy they're not the issue... Checked the voltage going to the HCV. Got the flowing results.
Dial set to hot - 13.7
Dial set to cold - 8.9
Middle setting.. . Fluctuates between the above two.
All interior electrics are working so assuming fuses are fine.
Why on earth am I seeing 8.9 volts on the cold setting. From what I've read it should be near 0.. Can't work it out???
Many thanks