Help need some advice

[darrylroberts21]

is it hard to wrap a bonnet in carbon fibre vynl would it be worth haveing ago my self, or should i pay a pro??

 

[scofield.1]

Don't try this alone! it's at least a two man job if you are ever going to have no creases. If you are excellent at wallpapering around corners and always get a good finish, then watch every youtube vid there is on it and give it a go! Make sure you have all the tools though, and a hair dryer is not good enough.

Excellent if you get it right, massive heart ache if you don't!

 

[bettie boo]

Not so much hard but you will need patience and a heat gun/hair dryer the hardest bit i found was the front cus it curves! i used the 3m vinyl wrap cheap on ebay, i took the bonnet off and did it in my garage, heat it up and push out the bubbles just mind ya fingers can get warm took me couple hours start to finish.

 

[darrylroberts21]

Cheers guy I think I'm gonna give it ago I will let u no how's I get on