help with brake conversion

[Craigps2]

hi i have a ford puma with i think ford mondeo brake conversion at the front (i got the puma with the brake conversion on)

i have just got a 2nd puma due to head gasket problem

and i want to the brake conversion on to my new puma

but how do i do this

please help

 

[ScubaSteve]

drill 12.5mm holes in knuckles and bolt straight on

theres a how to in the strangely named how to section

 

[Craigps2]

what about the abs and that and the fluid??

 

[Anonymous]

theres a how to in the strangely named how to section

As ScubaSteve says, look in the 'How to' section.

I followed his guide for the Mondeo brake upgrade, and the info was spot on. Very self explanatory really... all you need to know!

 

[Craigps2]

ok thanks alot i shall attept it monday

 

[ScubaSteve]

They will need bleeding get an eezi bleed kit from halfords and brake fluid

 

[Craigps2]

ok thanks if i get stuck i no where to come

 

[JonB]

If you are going to change the fluid totally (include bleeding the clutch out too) you will need more than 1l of fluid. Halfords do a 5l of DOT4 for cheaper than 2 x 1l of the same.

 

[ScubaSteve]

id get 5.1 personally but both will be ok