hi all

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

woody1988

New member
Joined
Nov 29, 2012
Messages
2
afternoon all im new on here but am a big user on other forums,
i drive a fiesta with a puma engine in and this is one of my dailys my other being a civic jordan #92/500

anyways here is a bit of a quick spec of fiesta
98 r reg
mk4
radiant red

engine:
1.7 puma engine
4-2-1 pro tec manifold
ashley cat back system
pipercross foam induction filter with samco
sull coolant samcos in purple
non pas and non ac
4bar reg and 2.3 ultima injectors
mapped on tape ecu
engine cover painted in matt black with cadbuarys purple writing
fire wall cover removed

brakes and steering ect:
wietec coilovers down about 80mm
powerflex rear bushes
mk5 zs rear beam
sierra cosworth 283mm front brakes with drilled and grooved discs, and green stuff pads, painted in cadbuarys purple
260mm focus rear disc set up painted in cadbuarys purple
ford racing puma hand brake cable
12.5mm axle spacers
10mm front spacers
non pas rack

Interior:
fiesta zs phase 1 red interiour
front fiesta rst recaros
puma steering wheel
custon made x-brace in rear painted in cadbuarys purple
back stripped out
puma mats
puma gear know
electric windows
black carpet
full suede headlining, a,b,c pillars (when i fit them again)
flocked steering coloum surround
flocked door handles
flocked heater covers either side
panther black speedo surround
traction controll button out of a transit that fits where front heated screen button fits
smd rear boot lights (twin)
smd interior lights

Exterior:
rs2000 in matt black on toyo tr1's
full mk5 zs bodykit, made to fit mk4 front
tinted front lights
fogs removed, trumpet fitted to one with 100mm cold air feed put in
side strips removed
bump strips painted panther black
shortened ariel
panther black door handles
tinted rear windows
panther black fiesta rs spoiler
MHW rear lights de-filtered
led number plate lights
led side lights
HID 10k headlights
Hid 10k full beam
smoked side repeaters
smoothed boot
pressed plates (had to take off kept getting pulled :/)
team heiko wind deflectors
panther black wing mirrors
carbon fiber wrapped base plates
carbon fiber key hole covers
factory tinted front windows slight green colour
flat blade wipers
trs tow strap

thats all haha
here is a few pics hope you like

409555_10150557735153251_527543250_8912162_606110719_n.jpg

431486_10150557734363251_527543250_8912156_474175232_n.jpg

401567_10150494858068251_527543250_8741807_967218056_n.jpg

405528_10150452883028251_527543250_8594326_660911576_n.jpg

P1020908.jpg

IMG_0500.jpg

IMG_0526.jpg


heres a quick pic of the jordan to

577146_10150678390248251_527543250_9309955_716430463_n-2.jpg


comments :)
 
Not a fan of the mark 4's.. But we'll done on all the work you've put into it.
Welcome :eek:k:
 
cheers and yeah its had loads of work but dont know which way to go at the moment if i should itb it or just go with a better inlet cause its my daily drive but already got some yamaha 5vy 42mm itb
 

Latest posts

Back
Top