how to take the doors off?

ProjectPuma

Help Support ProjectPuma:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Craigps2

Member
Joined
Feb 13, 2012
Messages
216
hi how do you take the doors off? i can see there pins and i have tryed banging them out but not moving at all any help ?
 
http://www.projectpuma.com/viewtopic.php?p=156791#p156791" onclick="window.open(this.href);return false;
 
Basically the hinge pins do move but you need to give them the good news with some proper effort.

Biggest problem is that its awkward to do it if you don't want to damage either the car or the door.

I find it easiest to knock the pins down with an extension bar until there's enough visible to get pliers on the bottom, then grip the pin and hit the pliers. Helps to have a few people on the job. Don't forget to remove the loom and check strap first before the hinges as well.
 
When I took my door off, the biggest thing I could find to shift the pins was a masonry bolster and mallet!

Then an old screwdriver to knock them through the hinge.
 
pain in the arse of a job, really stupid design by ford that they have been too lazy to change since late 80's!!!!!

there are tools out there to fit to them that you hit but most are crap
 
I found a video for that, the bit you need is at about 2:30 :grin: :grin:

http://www.youtube.com/watch?v=L78AwbNthF8" onclick="window.open(this.href);return false;
 
lol... wasn't what I was expecting, but funny all the same!! :lol:
 
topmansparkie said:
lol... wasn't what I was expecting, but funny all the same!! :lol:

were you expecting this? :grin: :grin:
http://www.youtube.com/watch?v=8g_GeQR8fJo" onclick="window.open(this.href);return false;
 
That was previously in this thread but seems to have been deleted, along with a suggestion of "Chainsaw" from the Scotsman.
 
sorry didn't realise this had already been posted/deleted

Damn those mods, no sense of humour LOL

Oh well, just a matter of time till my posts vanish as well then (not for the first time) :grin: :grin: :grin:
 
PhilLew said:
Damn those mods, no sense of humour LOL
That Neil especially is a right bell end. :-D (love you really, Neil :wub: )
 
Back
Top