Pistons

[Ginger Tom]

Can someone I've me these specifics on the 1.7 piston as I have scrapped all my pistons I removed from my 1.7 block:
Compression height
Gudgen pin bore and length
I know the bore size.

The reason I ask is I have an idea for all you turbo nuts to save you having to use a decomp plate

 

[PumaNoob]

I know your idea, I'll see if I have a puma piston lying around in the garage to get some measurements from! You could well have found a nice little gem!!

 

[Ginger Tom]

Tell me about it!!! Check your emails, I've had an idea......

 

[Ziggy]

Be very careful skimming the pistons to reduce the CR, ideally, you'd have even thicker piston crowns than standard to help take the extra heat generated during the "forced" combustion.

 

[Ginger Tom]

Don't worry mate I ain't skimming pistons

 

[Blue3]

Does frankenstein give any clues?

Simon

 

[Ginger Tom]

Sort of, I've found some pistons that are the correct bore, but I just need the measurements from the 1.7 pistons to see if they will work

 

[Blue3]

Nice work

Simon

Sort of, I've found some pistons that are the correct bore, but I just need the measurements from the 1.7 pistons to see if they will work

 

[Dziku]

I now that this is old thread, but anyone has dimensions asked above? And deck height maybe?