washer problems

[lucy]

looks like my window washer motor has gone and broke, so iv got a new one.


question is....how do i get to the old one? I know where it is but do i A. have to take off the wheel and liner or B. take off the wing?
Id rather know what Im letting myself in for than start and find out it could have been done an easier way!! It looks like its in a bad place to get to.



(when I say "I" what I really mean is pumajay hahahaha)

 

[YOG]

1. Turn wheels fully to the left.
2. Remove the 2 screws attaching arch liner near the pump.
3. Manipulate the liner away from the pump.
4. Remove old pump and replace with new one.
5. Check pump works correctly and then replace liner.

 

[Dal]

This is the washer bottle out:

This is it in:

I think there is only the one nut at the top and a clip. But you do not need to take the whole bottle out as the pump is just a push fit in the side.

Just the wheel off (can do it with on and turned, but easier with off) , arch liner unscrewed and there's plenty of room. Only unclogged my washer bottle pump yesterday.

 

[PumaJay]

looks like i'll be able to do it then, i was just dreading having to take the wing off!!

 

[C.B.Autos]

Hey Dal.. lol they probaly need to do the old c.b autos mod lol..,

When u get the washer pump out you might just find the black rubber filter blocked,

Once you have the pump out, you will see a rubber seal thats pushed in to the washer bottle, simply pull it out of the bottle, either clean the sludgy residue off the filter or just cut the filter off,

chris
c.b autos.