Recent content by Car Killer

Update... I got my feston leds from china,when i putted one,since it was daytime,i tought it was weak,so i combined 2 of them and here is how it looks :D this is how it looked in daytime :D i almoust became blind when it lighted up at night :D I also had an idea for back seat...

a little update Since i got a loot of tools in my trunk,i got tired of the sub woofer in it,it takes a lot of space,an there isnt many :D So i removed it and put 17cm bass speakers in the original boxes,and connected it to an amp installed I removed the car jack,and used its holes to...

Did any body try to put 2DIN radio in puma? Does it fit,or it is needed to modify dash (cut something) ??

Or,you can buy second hand ecu,and desolder 8pin eeprom from your damaged ecu and put it in second hand one and you dont need to recode keys or anything

not work,but works over laptop and bluetooth dongle..... with digimoto

I tested yesterday this interface with my htc and puma and NOT WORK... I have this one and it WORKS great,on lot of car manufacturers and android aplication TORQUE...

or your OBD connector? Check connector for water damage..

i have ELM too and works just fine,tested on many fords,what aplication do you use?? I use Torque,and works just fine,maybe problem in elm interface??

you have to find relay that activates the fans,then check the power suply of relay ,is it +15 or +30 (from ignition lock power to constant (batery) power ) if it has constant power then you need to connect your switch to relay activation wire,if main relay pin hac power on it only when ignition...

IS it OEM alarm or aftermaket one?

just dipped,becose i think there is no point to put them in high beams,becose you cant flash woth them,it will kill the ballasts and bulbs and it takes time to heat up properly...

Today i bought a high flow air filter,and instaled it,but needed to be modified to house the Intake air temp sensor :D

Boot release relay is on the side of the fuse box,by the clutch peg....i think there is a fuse next to it,i cant remember right now.but i dont thint this is your problem,try disconnecting the rear lock cables,you have problem in release signal,not in release actuator! Actuator is in the lock...

check boot release switch,on back side of car,under the boot mat,probably water damage on connectors,or micro switch on the lock !

Sunny days have come,it's time to work :D I found time to prepare my broken bumper for painting.. and also had my hopper key made for my alarm system :D