Search results

Do all 1.6 transmissions from other models fit into mha puma?

can't get any cleaner!

the only way I managed to do it is to unclip the black cover from the cluster first, then insert the cluster, rotate it inside like this: and then brute-force the speedo cable in first. after that the 2 remaining connectors are easy to clip in the same way as the speedo cable, THEN I clipped...

Taking whole dashboard out because of it would be silly

I managed to disconnect it (miracle), now I can't connect it back: - its located behind in the middle of the instrument cluster, little to no space for hands - speedo cable needle is square, but rotated correctly in same way as the port of instrument cluster = port for the speedo cable /...

For anyone still wondering how to unclip the speedometer cable, you have to squeeze the connector from below and then pull: https://youtu.be/kOE8YdhsMRg?t=19

model - 1.7 1998; I ordered this speed sensor https://ibb.co/hRQfN6T, but now I see it is not the same one I have on my transmission. (I couldn't upload images via attachments, so here are links:) Is this the correct one? https://www.autodoc.co.uk/meat-doria/10356904

Air filter was soaking wet and got ripped in the middle by snow after last ride. Replaced it with new one after 3 days but in that time the road salt (which got sucked through the filter) froze around the throttle body flap. That caused messed up air flow - cleaned it and engine runs ok

Thanks ok. Remember the wrench size btw?

And how difficult it is to get out old sensor and new one in? I read that there is no need to get under the car, that it can be done from the hood

I had mine transmission+clutch changed and now when I plug speed sensor in the Electronic engine control fuse (15V) gets blown right after I turn the key into 2nd position, not even 3rd (in 3rd it doesn't even crank). Also no fuel pump noise! Already had some issues with that sensor due to...

For 100$ I got a used transmission from other 1.7 puma and had it replaced with clutch at the same time. Fixing an old transmission that leaks ain’t worth the effort.

Thanks for fast answer. inside the transmission am I right? :hide:

Nasty brake fluid leak next to left front wheel after I engaged reverse and I couldn't disengage it afterwards - I had to switch off the engine, then putting it into neutral. I was in a hurry so I topped the brake fluid reservoir, started the car and drove home. Same story with parking in...

I'm from Czech Rep. and I just ordered LuK clutch kit for ~100$ (2100czk) from https://autodily.mjauto.cz/ford.html 20-30% discounts for brand new parts is a heaven for us car nuts in this country. Not sure if they ship abroad

Thanks for the tip, once the 3rd pair of these will arrive I'll give it a go again.

already lost the 1 on driver's side, silicon glue didn't stand a chance against pot holes.

did someone try to fix them in place for good? I got a 2nd pair and not planning to lose them again. Lost original ones thanks to potholes if yes, how did you do it? I can't seem to think of anythin simple yet effective enough, mostly due to almost 0 work space in that area and minimal...

mine fell off, first driver side, then passenger side - all thanks to bad roads full of holes. no wonder tho, I got pair of used ones, recolored them and they seem to fall off sooner or later from the rear again. Did you try to fix them somehow in place?

Fan goes crazy straight after I start the engine. From the moment engine starts running it takes 3-5s for fan to spin slower speed and second later it goes full speed. Some notes: Fan behaves normal when puma moves but when it just idles the fan kicks in again almost right after I stop. Engine...