Anyone spare me £25k? 3.0 V6 Imtec RWD

[mihalyn90]

Because something nice, can look even better:

 

[ArtfulHussy]

My only complaint with that is the bonnet. Where did you get that photo please?

 

[mihalyn90]

These are the only two photos i ever come across... IIRC, i got them on pinterest...

 

[ArtfulHussy]

That's a pity, I actually really like that! Wouldn't mind a read of the build thread if there was one.

 

[mihalyn90]

But there is not i am thinking about filling with fiber glass and cuting the shape, and even on the front... damn... lovely car...

this is all i got:
https://www.drive2.ru/r/ford/4062246863888193565/

 

[red]

Slightly off topic but the text from that article says the following:

Auto is now in the stage production of wide body kit! Who will edenichnye ekzemplyare out more in the logbook!
All many thanks for voice and for subscribing!
(sorry for that project looking for is undeveloped and can not compete with some of the participants! but in the future I'm going to surprise you all)

Car Ford Puma (Ford Puma) was published in
1997 Geneva Motor Show as the third car assembled in the Ford Fiesta platform. The second was a small Ka. In the design "Puma" specialists took Ford Puma polgoda.Glavnoy all purpose design team headed by Claude Lobo was to create a memorable image of cars Ford Puma (Ford Puma). So - not practical, not modern, and memorable. Looking at the car «Ford Puma», you know - Claude Lobo reached, what kind of car hotel.Vneshny - more than a custom. Ford's new edge is embodied in all of its armor-piercing capacity - cars Ford Puma (Ford Puma). Neither the line does not end just like that - everywhere arches, contours, overflowing ... The most stylish in design cars - and the optics Ford Puma (Ford Puma). Under the general triangular hood lights are small dots dimensions, roundels and dipped beam, and the same form of turn signal. In the same manner, and the rear lights are made. Excellent look rear wing, which is felt as a natural continuation of the bodywork lines.

Ford Puma 1.7 16V (125 Hp)

General characteristics
Body Coupe
Years of manufacture 1997 - 2003
Engine capacity, cm3 1679
Engine power, hp 125
Maximum speed km / h 203
Fuel consumption, l / 100 km 6
Acceleration to 100 km / h, 8.9 seconds

Characteristics

Body / Payload
Length mm 3984
Width mm 1674
Height mm 1345
Number of doors 3
Seats 4
Wheelbase 2446 mm
Front track mm 1450
Rear track, mm 1411
Minimum volume of trunk 240 l

Engine
Engine capacity, cm3 1679
Engine power, hp 125
The number of revolutions, rev / min 6300
Torque 157 Nm
Position of cylinders Inline
Number of cylinders 4
Bore, mm 80
The piston stroke, mm 83
Number of valves per cylinder 4
Fuel AI-95 and above ...

Transmission ib5
Gearbox type Mechanical
Front-wheel drive
Gear 5

Suspension
The front suspension strut
Rear suspension helical spring
Brake system
The front brake discs
Rear Brake Drum

Steering
Steering Gear Type rail
Power steering Power steering

performance
Maximum speed km / h 203
Acceleration to 100 km / h, 8.9 seconds
Fuel consumption in the city, l / 100 km 9
Fuel consumption, l / 100 km 6
Fuel tank capacity, l 42

Dimensions and weight
Curb weight, kg 1040
Curb weight, kg 1400

in the car converted virtually all and continues peredelovatsya.
complete repainting-side black mat-everything else is white gloss (originally red)
alter interior black and white skin, black ceiling alkantara.lezhat mats Louis Vuitton.
zaniizhena-EIBACH suspension springs, front brake moved back to the front set of Mondeo.
wheels stilauto 5 Five r16 are painted in high-gloss white, shod with tires toyo 205/50/16
kit around in style audi (bumper, side skirts)
...
is there a video:!
(I checked and the video is gone)
passport data

1.7 petrol engine (125 hp)
Manual Transmission
Front-wheel drive
Machine 1997 release, was bought in 2008
Ford Puma manufactured since 1997

Loads more images of it on there also:

Apparently the rear diffuser is from an Arbarth

There's so much info I can't post it all, looks like the kit was custom made from wooden templates:

These pictures are all from the owner / posters site so if they get removed etc they will be lost.

 

[mihalyn90]

This is where my project is going though I'll mod the front a bit more, adding a splitter...

i should do a gofundme kickstarting

 

[moondustka]

I quite like the back of that actually

 

[TGPlayer1]

Yeah i like the back, but the rest of it is a bit overkill for me.

In my personal opinion I don't think a Puma can look any better than with the proper S1600 kit, i just love the lines but always felt it looked a bit narrow from some angles.

 

[mihalyn90]

mne i don't see anything overkill here... it's just split perfect... i don't see anything i can hate...

I mean look at these:

That one instead... pitch perfect!!! work of art

 

[Frank]

[post]347841[/post] mne i don't see anything overkill here... it's just split perfect... i don't see anything i can hate...

I mean look at these:

Yeah, but you're also the guy who thinks that covering a Puma in Soviet Bloc Winter Camouflage is a great look.

Point is, you can't force someone to like something, just because you do.

 

[Dal]

It's good we all like different things :thumbs:

 

[TGPlayer1]

Exactly, variety is the spice of life, I just happen to dislike aggressive styling and prefer smooth lines and subtle skirting.

 

[Dal]

Yup me too. A spoiler is well named in my opinion but that not to say others can't love 'em!

 

[mihalyn90]

I so ) laugh at this spots thing... anyway... i'll change them soon and put on just like on that white puma

 

[red]

I like the styling, I think I'd prefer it if the bonnet was standard though

 

[moondustka]

[post]347840[/post] Yeah i like the back, but the rest of it is a bit overkill for me.

In my personal opinion I don't think a Puma can look any better than with the proper S1600 kit, i just love the lines but always felt it looked a bit narrow from some angles.

Agreed, although I think I prefer the FRP kit, the S1600 is sooo wide