mastercylnider; which pipe is front brakes and which is rear

[jacko]

I have already turned off the abs, removed sensor's etc (no arguements or comments please!)

want to convert all solid lines to braided, routed in car etc....

first thing to go in the bin is the abs module thingy which is fed from the mastercylinder....

at the moment 2 brake lines go from the master cylinder into the abs module, 4 leave the abs module and go to the wheels....

but i need to know which one of the pipes from the master cylinder is front and which is rear wheels (they will have different valves / pressures)

help please!

also; can i just use a 'T' piece to split ie the front into 2 to go to both front brakes

any help greatly appreciated, thanks

 

[ScubaSteve]

i dont think it matters both will get equal pressure, when i did it i did rear pipe to front brakes and front pipe to rears. You will need a bias valve in the rear lines though as there will be no abs pump to bias it

 

[jacko]

cheers. looks like i'll be going for a pedal box now tho as iv been looking through my s1600 manual