1.7 oil separator box gasket

[Pugmanaught]

Morning all.
So whilst rebuilding my spare engine I'm after the above rubber gasket for the black plastic oil breather box(the one the little one way valve pushes into) on to the front of the engine block.No longer serviced from Mr Ford of course.
I've ordered one from an 05 Focus Cmax 1.6 sigma as for £13 it's worth a punt to see if it'll fit.
Anyone got a get around apart from a tube of sump sealant??

 

[YOG]

Is this the one you mean (Emission Control Case Seal)?

 

[Pugmanaught]

No mate...The main gasket 6B752.

 

[caprixpack]

I've found this, when cross-referenced the part numbers match but I think the picture is wrong.
https://m.autodoc.co.uk/ajusa/8554931

 

[Pugmanaught]

Managed to get a closer look at the part slide.
Caprixpack how did you find that part number?Looks to be unavailable as 6B3752 isn't listed.
I'll see if the 1.6 zetec se part I've ordered is similar then look into that ajusa part.Might end up changing the breather box to match....

 

[joseph3666]

Checked the dealer site, finis number you need is 1008056 or 96MF-6B752-AA

 

[Pugmanaught]

Nice one Joseph3666
I note this is the same as caprixpack came up with..