I didnt do much usefull today except loosing some black srews for the instrument cluster down in the aircondition hole on the dashboard,and they are lost hahah :--) But I learn , will keep screws on a better place next time.
Well I did do some usefull things, added the fuse(cruise controll) in the main fusebox so the brown wire is out of the picture.
I found the switch, I guess its better to look for it than useing drawings, I guess am to used to do that on my earlier workingplace everything in field was tagged and we had a 3d program of the working area for looking up tags. yeap its lazzzzzzzzzzy.
Well back to work I took some pictures, I ve added some commens on all of them need your help.
First did you cut the tubes? in bth ends or did you manised tu get it off? , I tried to get it off by turing it around and around but I didnt manised to get it off in nighther of the ends.
And than for the brake pedal switch, I tried to messure ohm to find out what was live end and what was not but I dont get it I get full connection to grown (minus) on both.
Next up the VSS, I probably messed up there when I was looking for the VSS , I removed this cable and I just cant remember witch way it was connected,
I thought everything was dummy made :-( It was attached on back of the instrument panel.
PS: The VSS and rev counter am I any way close, where is pin 21 and 18?
Well I did do some usefull things, added the fuse(cruise controll) in the main fusebox so the brown wire is out of the picture.
I found the switch, I guess its better to look for it than useing drawings, I guess am to used to do that on my earlier workingplace everything in field was tagged and we had a 3d program of the working area for looking up tags. yeap its lazzzzzzzzzzy.
Well back to work I took some pictures, I ve added some commens on all of them need your help.
First did you cut the tubes? in bth ends or did you manised tu get it off? , I tried to get it off by turing it around and around but I didnt manised to get it off in nighther of the ends.
And than for the brake pedal switch, I tried to messure ohm to find out what was live end and what was not but I dont get it I get full connection to grown (minus) on both.
Next up the VSS, I probably messed up there when I was looking for the VSS , I removed this cable and I just cant remember witch way it was connected,
I thought everything was dummy made :-( It was attached on back of the instrument panel.
PS: The VSS and rev counter am I any way close, where is pin 21 and 18?