Hi Everyone!
A lot of you are already aware that my Puma has been through quite a few changes since i've had her; simply due to me having new ideas a lot of the time.
This thread starts from the beginning, like a mod by mod diary of things i've had done so to speak, from beginning, to present.
But just to list, present modifications are as follows (in order of having been completed):
17" Speedline wheels
Etech Front Upper Strut brace
Oil temp gauge
Blue alacantra steering wheel
Blue dash LEDs
Kenwood head unit
Bonnet Pins
Sparco Harnesses
Stripped rear interior
FRP Door cards
Samco Induction hose
OMP rear upper strut brace
MS Designs rear spoiler
Full Respray in FORD ICE WHITE
Rally style vinyls
White Ford gel badges
Custom Ford Racing gel badges
AP Coilovers
FRP Seats
FRP ECU management system
Full Miltek stainless steel 421 exhaust manifold and de-cat system
Remanufactured 1.7 Puma Engine
Samco Coolant hose kit
RamAir cone air filter
Rear brake disc conversion to 280mm ST170 set up
FRP Camshafts
20mm rear axle spacers
Front brake upgrade to 4 pot Brembo calipers and 300mm discs
20mm hub-centric spacers
FRP Inlet manifold
Please read on for progress and photo's from start to present...
Last updated: Mon 28th Apr 2014 20:39
Tue Nov 24, 2009 2:48 pm
Ok so i guess i should start from scratch!!
She's a 1.7, registered in 2001.
This is what she looked like when i bought her back in November '05:
I didnt start making changes until probably a year later when i got her an awesome Ripspeed air filter lol
Then in February '07 i got her lowered with PI shocks and springs, 40mm drop all round
Soon after i put Puma logo stickers over the ford badge (the front one's fallen off now though!!)
The following June i bought her some new shoes; a set of Speedline Corse's - 215/40/17
Then in July she got a 4extreme custome made cat-back exhaust system
Not long after that i purchased an F2 Racing Puma rear wing and replica Racing Puma front splitter
Then came the Beesting ariel, and then came Clear Side repeators
The rear wing was fitted in September '07
Then i changed my mind and got rid of it - my mate sorted a small dent in the bonnet and sctratches in the rear bumper at the same time as filling in the holes from the spoiler
At xmas i got a 12" Fusion Sub and Amp 400w - as well as an MP3/ipod adapter Kenwood head unit
I didnt really touch her for a while, then all at once in April '08 i got my calipers painted blue,
Blue Sparco mudflaps
Custom made Puma logo vinyls
And and E-Tech front upper strut brace
June '08 i FINALLY got that Racing Puma front splitter fitted
and on the same day i removed the frosted lense and orange bulbs from my headlight indicators, and also fitted some fancy LED sidelights
I then got the front discs and pads changed for Red Dots:
Not the best shots in the world but unfortunately i didnt get any pics of them before they were fitted!
February '09 my mate fitted me some HIDs
Standard
The difference between the two
After
And a few night shots
And this was her most recent photoshoot up to that point...
I have since had an Oil temp gaugue, a blue alacantra steering wheel, a K&N air filter, blue dash LEDs and Blue/Black Bucket Seats fitted by Silverback Performance but i currently have no pics lol. I will get round to taking some soon
EDIT: As promised.....
Comments welcome
A lot of you are already aware that my Puma has been through quite a few changes since i've had her; simply due to me having new ideas a lot of the time.
This thread starts from the beginning, like a mod by mod diary of things i've had done so to speak, from beginning, to present.
But just to list, present modifications are as follows (in order of having been completed):
17" Speedline wheels
Etech Front Upper Strut brace
Oil temp gauge
Blue alacantra steering wheel
Blue dash LEDs
Kenwood head unit
Bonnet Pins
Sparco Harnesses
Stripped rear interior
FRP Door cards
Samco Induction hose
OMP rear upper strut brace
MS Designs rear spoiler
Full Respray in FORD ICE WHITE
Rally style vinyls
White Ford gel badges
Custom Ford Racing gel badges
AP Coilovers
FRP Seats
FRP ECU management system
Full Miltek stainless steel 421 exhaust manifold and de-cat system
Remanufactured 1.7 Puma Engine
Samco Coolant hose kit
RamAir cone air filter
Rear brake disc conversion to 280mm ST170 set up
FRP Camshafts
20mm rear axle spacers
Front brake upgrade to 4 pot Brembo calipers and 300mm discs
20mm hub-centric spacers
FRP Inlet manifold
Please read on for progress and photo's from start to present...
Last updated: Mon 28th Apr 2014 20:39
Tue Nov 24, 2009 2:48 pm
Ok so i guess i should start from scratch!!
She's a 1.7, registered in 2001.
This is what she looked like when i bought her back in November '05:
I didnt start making changes until probably a year later when i got her an awesome Ripspeed air filter lol
Then in February '07 i got her lowered with PI shocks and springs, 40mm drop all round
Soon after i put Puma logo stickers over the ford badge (the front one's fallen off now though!!)
The following June i bought her some new shoes; a set of Speedline Corse's - 215/40/17
Then in July she got a 4extreme custome made cat-back exhaust system
Not long after that i purchased an F2 Racing Puma rear wing and replica Racing Puma front splitter
Then came the Beesting ariel, and then came Clear Side repeators
The rear wing was fitted in September '07
Then i changed my mind and got rid of it - my mate sorted a small dent in the bonnet and sctratches in the rear bumper at the same time as filling in the holes from the spoiler
At xmas i got a 12" Fusion Sub and Amp 400w - as well as an MP3/ipod adapter Kenwood head unit
I didnt really touch her for a while, then all at once in April '08 i got my calipers painted blue,
Blue Sparco mudflaps
Custom made Puma logo vinyls
And and E-Tech front upper strut brace
June '08 i FINALLY got that Racing Puma front splitter fitted
and on the same day i removed the frosted lense and orange bulbs from my headlight indicators, and also fitted some fancy LED sidelights
I then got the front discs and pads changed for Red Dots:
Not the best shots in the world but unfortunately i didnt get any pics of them before they were fitted!
February '09 my mate fitted me some HIDs
Standard
The difference between the two
After
And a few night shots
And this was her most recent photoshoot up to that point...
I have since had an Oil temp gaugue, a blue alacantra steering wheel, a K&N air filter, blue dash LEDs and Blue/Black Bucket Seats fitted by Silverback Performance but i currently have no pics lol. I will get round to taking some soon
EDIT: As promised.....
Comments welcome